EL 10 100° x   10° (HxV)

10” + 2 x 1” / 2-way hornloaded line-array speaker / 400W (RMS)

The compact EL10 is a coaxial, horn-loaded 10 "/ 2 x 1" high-performance line array module. Due to the big midrange horn, the EL10 works from a frequency of 60 Hz on. The tight coupling of the components ensures an uniform vertical dispersion and increased dynamics. The extremely high sound pressure of 133 dB allows a powerful and outstanding performance for 12,000 people or more. EL10 can be used in flown applications with up to 12 units in a line.

► 100° x 10° (H x V) nominal coverage
► Max. sound pressure level 133 dB (60 Hz-20 kHz)
► 400 W speaker power capability / 8 ohms impedance
► High driver unit with 2 x 1,75“ PM4 voice coil
► Fully integrated flyware
► Cabinet can be stacked onto E18SUB subwoofer
► 28 kg weight

The EL10 is a two-way high performance line array speaker in a trapezoidal chassis for fixed installations and mobile use. The cabinet is equipped with two 1" HF drivers (1,75” voice coil), which are mounted onto a wave guide. The nominal coverage is 100° x 10° (H x V). The MF/LF section is equipped with one high-performance 10" speaker (3” voice coil), which is hornloaded. The 10” transducer is contructed behind the wave guide of the high-frequency section (coaxial construction). The EL10 can be flown in vertical colums with up to 12 units per side by using the EC1 flyframe. The angle between each EL10 can be adjusted from 0° up to 7,5° in steps of 1,5°. The EL10 is compatible with all other ELITE models including ELITE subwoofers. Up to four EL10 can be directly stacked onto the E18SUB subwoofer without any adapter or additional frame. The chassis is constructed from 15 mm plywood (birch) and covered with black PolyCoat© finish. The cabinet is equipped with two grip handles and one front grill with transparent charcoal foam backing. Two speakon connectors (NL4) are mounted at the rear side of the chassis for signal input (input) and signal link (link). The power rating of the EL10 is 400 W (RMS), the impedance is 8 ohms.

10", two-way, horn-loaded, coaxial, line array
60 Hz - 20 kHz
70 Hz - 18 kHz
100° x 10° nominal
Advanced Waveguide for less distortion
Passive
1.1 kHz

Passive: 400 W / 800 W
133 dB SPL peak
103 dB SPL
1 x NOVA 10/400EL, 3” voice coil woofer
8 ohms (passive)
n/a
n/a
2 x NOVA TPM4-1750, 1.75 in. voice coil driver
8 ohms (passive)
n/a (passive)
Fullrange, 15 mm, plywood (multilayer)
Integrated flyware including pins, aluminium / steel
2 x integrated handles
Black NOVA PolyCoat© finish
Powder coated, black, perforated steel with acoustic
transparent charcoal foam backing, NOVA logo
2 x Neutrik© Speakon© NL4
1+/1- (2+/2- linked from input to output)
590 mm x 340 mm x 535 mm
28 kg
EC1: Flying frame (Article number: # 26109)
ACS2: Set of 4 stand for EC1 (Article number: # 30153)

System Type:
Frequency Range (-10 dB):
Frequency Response (±3 dB):
Coverage Pattern:
HF Horn:
Crossover Modes:
Crossover Frequency:
Power Rating
(Continuous** / Program):
Maximum SPL***:
System Sensitivity (1w/1m):
LF Driver
LF Nominal Impedance:
MF Driver:
MF Nominal Impedance:
HF Driver:
HF Nominal Impedance:
Active Tunings:
Enclosure:
Suspension / Mounting:
Transport:
Finish:
Grille:

Input Connectors:

Dimensions (W x H x D):
Net Weight:
Optional Accessories:

DOWNLOADS
 

CAD Drawings

PDF Technical Drawing

pdf thumb

DWG Technical Drawing

dwg-thumb1

Product Pictures

JPG Picture 1

filethumb

JPG Picture 2

filethumb

EC1
Flyframe for ELC26, EL10 and EL15 line-array modules, the
EH15 speaker and subwoofers ELC15 SUB and E15 SUB,
25 kg weight

SYSTEM CONCEPT
 

Line Array Types

Monitoring Types

Rigging Subwoofers

Ground Subwoofers

Recommended Subwoofer(s)

EL10closed500
EL10open150

3D ARRAY AIMING SOFTWARE
 

CONTROLLER PRESETS
 

ACS2
Set of 4 feet (M20), for ground stacking applications,
for EC1 flyframe

EC1120
pdf thumb

PDF Maximum Loads  Guide

PDF Technical Drawing EC1

pdf thumb

PDF Technical Drawing EP2 Pin

pdf thumb
dwg-thumb1

DWG Technical Drawing EP2 Pin

dwg-thumb1

DWG Technical Drawing EC1

ACS2120

FLYFRAMES
 

ACCESSORIES
 

Program Software Download EASE FOCUS 3.0.18

filethumb

GLL File for EL10

filethumb
ehorn600

EHORN | Hornloaded Core-Technology.

Line array systems are usually a combination of different technologies. The mid/high frequency range is covered by standard array cabinets. This enables high reach. But subwoofers are mostly based on direct reflecting or similar technologies. This results in different maximum reach and SPL between mid/high and sub/low frequency range. The solution for the same maximum reach along the whole frequency range: The ELITE family is completely based on NOVAs „EHORN“ technology. All models including subwoofers are fully horn-loaded.

ELITE systems offer the same SPL along the whole relevant frequency range from 20 - 20.000 Hz.
The result is an equable increase of reach.

The „Physical Correction“.

The vertical arrangement of several loudspeakers in a row results in an increase of reach. This offers the possibility of straight sound reinforcement along defined listener´s surfaces. The existing line array technologies offer well horizontal dispersion and a front-to-back coverage. Different technologies are used to avoid interferences and holes in the defined field.

In spite of every effort, many manufacturers simply do not respect important laws of physics like:
► Identical SPL from 20 - 20.000 Hz
► Precise, equable dispersion from 20 - 20.000 Hz
► Correct signal-runtime from every component (each single woofer  and  driver to each other inside a cabinet)
► Interferences and trouble-making „beam“ between  two woofers inside of one line array cabinet

NOVAs engineering department has respected all this points. Due to the unique combination of innovative technologies ELITE speakers are so-called „physically corrected“. This results in an increased functionality of a true line array system.

EWAVE | The high-efficient Waveguide.

Since the line array has come into vogue, countless designs revolving around to achieve the correct time behavior at high frequencies. It was mostly about trying a variety of single phasing lines to achieve the desired time response. With the skillful interpretation also leads to the target in relation to time. The most "adventurous" diversions are often the reason for higher distortions. As in our NOVA AT2 line array element (ATLAS series), we go a different way. We make the waveguide as small as possible and prefer to put in yet another driver. We divide the waveguide of each driver in just two phasing lines. The results are also a real-time behavior but at lower distortion.

ecox600

ECOX | Run-Time Correction.                 Picture shows EL15, which uses the same technology.

Line array systems are usually a combination of different technologies. The mid/high frequency range is covered by standard array cabinets. This enables high reach. But subwoofers are mostly based on direct reflecting or similar technologies. This results in different maximum reach and SPL between mid/high and sub/low frequency range. The solution for the same maximum reach along the whole frequency range: The ELITE family is completely based on NOVAs „EHORN“ technology. All models including subwoofers are fully horn-loaded.

ELITE systems offer the same SPL along the whole relevant frequency range from 20 - 20.000 Hz.
The result is an equable increase of reach.

eplug600

EPLUG | Increased Midrange-SPL.

NOVAs engineers have developed the so-called „EPLUG“ for higher sound pressure at the important frequency range between 500 Hz and 2.000 Hz. This technology is based on an especially calculated phase plug, which works onto the woofer of the mid frequencies. The EPLUG compresses the air molecules between membran and phase plug. This results in much higher sound pressure. Based on this technology, ELITE speakers deliver more sound pressure in this important range. It enables the use of even a 15" speaker without lost of the important mid frequencies. The crossover frequency between mid speaker and high driver can be set much higher then usually.

APPLICATION GUIDE / SYSTEMS
 

PDF ELITE Application Guide / System Configurations

pdf thumb
MDU1280

MDU1
Mains Power, NF and Speakon Distributor:
1 x CEE 3/16AMP Input,
4 x IEC 16AMP Output,
2 x NEUTRIK© XLR Female Input,
2 x NEUTRIK© XLR Male Loop Thru,
2 x Patch Cable NEUTRIK© XLR Male,
4 x NEUTRIK© 4-pol. Speakon Output,
4 x Patch Cable NEUTRIK© Speakon

mainbckbottonnova